SURROUND IN: 400mV (50 kohms)
VIDEO IN: 1 Vp-p (75 ohms)
Outputs AUDIO OUT (REC OUT): 230 mV (2 kohms)
VIDEO OUT (MONITOR): 1Vp-p (75 ohms)
SUPER WOOFER: 3.1 V
FRONT SPEAKERS IMP: 8
Ω/4 Ω
selectable (front speakers A and B)
With the SPEAKER IMPEDANCE SELECTOR set to 8
Ω,
accepts speakers of
8 ohms or more
SURROUND SPEAKERS IMP: 8
Ω
(surround speakers): accepts
speakers of 8 ohms or more
CENTER SPEAKER IMP: 8
Ω/4Ω
selectable
With the SPEAKER IMPEDANCE SELECTOR set to 4
Ω
accepts speaker of 4
ohms
With the SPEAKER IMPEDANCE SELECTOR set to 8
Ω
accepts speaker of 8
ohms
PHONES (stereo jack): accepts headphones of 32 ohms or more
Muting -20 dB
General
Power requirements 120 V AC, 60 Hz
Power consumption 180 W
Dimensions (W × H × D) 360 × 153.5 × 341 mm (14 1/4 × 6 1/8 × 13 1/2 in.)
Weight 8.9 kg (19 lb 10 oz.)
Specifications and external appearance are subject to change without notice.
The word "BBE" and the "BBE symbol" are trademarks of BBE Sound, Inc.
Under license from BBE sound, Inc.
DOLBY PRO LOGIC
Manufactured under license from Dolby Laboratories Licensing Corporation.
"DOLBY" the double-D symbol
and "PRO LOGIC" are trademarks of Dolby Laboratories Licensing
Corporation.
GENERAL (cont.) pg. 16
TROUBLESHOOTING GUIDE
If the unit fails to perform as described in these Operating Instructions, check the following guide.
GENERAL
There is no sound.
• Is the AC cord connected properly?
• Is there an incorrect connection? (
→
page 3)
• There may be a short circuit in the speaker terminals.
→
Disconnect the AC cord, then correct the speaker connections.
• Was an incorrect function button pressed?
