14
Installation and Operating Instructions
V00
4 Mounting
4.1 Ambient conditions
1.
Be sure the inverter is installed out of the reach of children.
2.
Mount the inverter in areas where it cannot be touched inadvertently.
3.
Ensure good access to the inverter for installation and possible service.
4.
Make sure that heat can dissipate, observe the following minimum clearance to
walls, other inverters, or objects:
5.
The ambient temperature should be below 40°C to ensure optimal operation.
6.
Recommend to mount the inverter under the shaded site of the building or mount
an awning above the inverter.
7.
Avoid exposing the inverter to direct sunlight, rain and snow to ensure optimal
operation and extend service life.
Direction
Min. clearance
（
mm
）
above
300
below
500
sides
200
