19
STOMPKIT
The StompKit comes with two
BOSS FS-5U footswitches,
special cables and a charging
cable. For extra convenience
in using the FS-5U, you can
slide the two switches
together.
For proper functioning of the FS5-
U it is important to check the
polarity switch. Make sure it is
pushed to the right when operating
with the BT-106.
The FS-5U switches are plugged
into ports 1-2 and 3-4 of the BT-106. Please note that you are
facing the logo on the BT-106 as you place the left cable into
the left side and right cable into the right side. See page 9 of
the manual sections for the BT-106 for switch functions. The
switches do the same tasks as pressing buttons 1 and 3 of the
keypad.
