Airtecnics Kleenbox 46/46, Installation, Operation And Maintenance Manual

Page: 10 / 16

10
MAINTENANCE INSTRUCTIONS
For safety, before cleaning, turn off the appliance using the controller.
It is forbidden to open the service panel (risk of electric shock and trapping in
fans).
Repairs must be carried out exclusively by authorized personnel.
The inside of the appliance must not be cleaned with water or steam.
Exterior cleaning
The Kleenbox HEPA filtration boxes do not need any kind of maintenance, except the housing cleaning for
the vertical models.
It is recommended to clean the inlet grille once a month. To do that, is very important to shut down the
equipment. If it keeps running, the fan could hover the wet dust causing damage to the rotor and covering the
filters, reducing its lifetime.
Cleaning the body of the purifier should be done with a damp cloth and a conventional detergent. Do not use
caustic or acid-containing detergents.
Internal cleaning
In models with perforated grille, it is advisable to clean the inside of the unit with a vacuum cleaner at least
once every 2 years (*), better to do it before winter, using qualified personnel.
It is recommended to clean the inside of the equipment frequently with the help of a vacuum cleaner. (*)
(*) These periods are indicative depending on the conditions of each installation. In places with a high
number of suspended particles it is desirable to increase the frequency of interior cleaning.
REPAIRS AND REEMPLACEMENTS
The assembly and the electrical connection must be carried out exclusively by specialized
personnel and observing these instructions.
Before carrying out any repairs, you must:
•
Notify staff and indicate that work is in progress.
•
Disconnect the power and protect the termal magnet (so that no one can
accidentally actuate it).
•
Make sure there is no voltage on the purifier.
•
Make sure that the fans have stopped.
•
Use only original spare parts.