Airtecnics K7 600 A OH+FC, Installation, Operation And Maintenance Manual

Page: 16 / 22

16
There is a safety switch, which deactivates the equipment when opening the grille. This way, the UV-A LED
light can never be seen on while maintenance is being performed.
Standard purifier motor or turbine replacement
Before changing the motor, warn and indicate that is working, disconnect the power supply, make sure that
there is no voltage and that the turbine has stopped.
Remove the side from the motor side. Disconnect the motor connector on the
power board (*)
Then loosen the turbine fixing screw (Allen 2.5mm) through the discharge port.