Airtec Expert CYPRES 2, User Manual

Page: 42 / 74

- CYPRES 2 User’s Guide - page 41
7. Technical servicing/maintenance
CYPRES 2’s extremely reliable functioning is
attributable to four factors: the exclusive use of
carefully pretreated and approved parts, strict and
detailed manufacturing procedures, continuous
quality control and monitoring throughout the
manufacturing process, and regular periodic techni-
cal servicing (maintenance). We offer maintenance
for four main reasons:
1. Deviations between nominal and actual values
are corrected to ideal values. Every detail is
observed. Signs of wear and tear are often
corrected and sometimes even ‘cosmetic’ treat-
ment is performed.
2. The technical condition of each unit is ana-
lyzed. The fact that a very high percentage of
units are returned for periodic maintenance
allows us to see statistical trends and predict
potential problems at a very early stage. This
means that it is often possible to prevent
situations by making modifications during the
maintenance process, rather than having to fix
problems that result in downtime later.
3. Experience has shown that during the period of
a maintenance cycle (4 or 5 years), changes and
improvements do happen. Applicable updates
are performed during maintenance. Such up-
dates may arise from technical improvements
or enhanced knowledge or may result from
environmental changes or changes in the sport
(e.g., new disciplines), which Airtec is always
researching and taking into consideration.
4. The most important maintenance element is
the individual pre-adjustment of each unit for
the next cycle. A unit will not be returned until
a high level of confidence is reached in terms
of predicting the unit’s correct function for the
next cycle.
CYPRES 2 offers two scheduled maintenance
events within the unit’s service life.