Airstream Nest 2020, Owner'S Manual

Page: 31 / 82

Interior
2020 Nest
5-3
Bluetooth® LED Lights
Additional information is located in your Owner’s
Packet.
• The Light Switch is a black rocker switch located on
wall opposite of galley and will operate light after
Bluetooth connection is established.
• Features are controlled with the app available on
both Android or IOS platforms.
NOTE
The battery disconnect must be on for power to the
wall switch. The power button on the wall switch
must be on for functions to operate within the LED
Light app.
1. Download App: Search “HaoDeng” in the Apple©
App Store or Google® Play Store. For units
manufactured before July 2019, search “Magic
Light-BLE” in the App store or “Magic LED Light
V2” in the Google® Play Store and click install.
Depending on your operating system, Android or
IOS, your screen layout may differ slight from the
following screenshots.
2. Open App: Turn on the Bluetooth on your phone or
tablet and open the app.
Wet Bath Shower Stall
To clean your fiberglass shower stall unit, use warm
water and one of the stronger liquid detergents. Do not
use abrasive cleaners as they may scratch and dull the
surface of your unit. Stubborn stains can be removed
with solvents such as turpentine, paint thinner, or
acetone. Restore dulled areas by rubbing with an
automotive type liquid cleaner, then, put the soft glow
back into your unit with a light application of liquid wax.
CAUTION
Applying wax to the base of the shower floor is
not recommended, as this could create an unsafe
surface.
Dinette
On the U-shape dinette floor plan, the dinette converts
to a bed. Lift the tabletop off the table support post.
Remove post and store in wardrobe closet. Drop
tabletop between benches and move seat backrests
from the perimeter walls onto the table area to
complete the conversion. Reverse this process to re-
assemble the dinette table.
The Front Bed model has storage behind the dinette
cushions and under the dinette seat.
Lighting and Switches
Nest features a variety of lighting options inside and
outside of the cabin. Lighting over the lounge, galley,
side-mounted sofa or pantry, wardrobe and under-bed
storage are switched at the fixture. Lighting for the
all other light sources are controlled by wall-mounted
switches.
The water pump is powered by a switch on the
SeeLevel II monitor panel, the water heater is
powered by a switch in the control panel area under
the refrigerator, and the A/C unit and furnace are both
controlled by the thermostat.