Airstream Interstate 24X, Owner'S Manual

Page: 38 / 116

Interior
5-6
2022 Interstate 24X
Table System
The Interstate 24X is equipped with two adjustable
tables and four mounting locations� One table is
mounted behind the driver’s seat and is convenient to
use when the driver’s seat is rotated� To remove the
table from the mount, rotate the knob near the bottom
of the leg and slide the table up� The second table
is stored in the bench seat� Two mounting brackets,
in which one or both the tables can be installed, are
located on either side of the bench seats� The fourth
mounting bracket can be found on the back of the
galley cabinet and is accessed when the sliding door is
open� This location is perfect for mounting the table for
use outside the touring coach�
WARNING
Make sure the table is tighten or return the table to
its storage position before moving the vehicle. In a
emergency stop or accident the table could cause
personal injury and/or death.
Driver and Passenger Seats
The driver and passenger heated seats are provided
by Sprinter, sent out to be recovered by Airstream to
match the interior decor�
The seat adjustment mechanism provided by Sprinter
allows the seat to be moved forward or backward and
swivel left or right� Buttons near the door handle are
used to move the seat forward and backward� Pressing
down on the handle, centered under the front of the
seats, allows the seat to swivel� Return the seat to the
full upright position before using the swivel adjustment�
The heated seats are activated by switches located
on the door, next to the seat controls� For complete
details on seat adjustments, please refer to the Sprinter
manual�
Rear Sofa/Bed
The rear sofa seats can be converted into a sleeping
area by placing support rods between the bench
seats� The support rods can be found inside a carrying
bag stored in the overhead nets� The supports are
inserted into the notches on the sofa base on both
sides� Once the supports are set, place the back rest
cushions, backside down, onto the supports� The back
rest cushions are specially designed with a hardened
backside to support the weight applied across the
support rods�