Airstream INTERSTATE 24 TommyBahama, Owner'S Manual

Page: 44 / 130

Interior
5-14
2023 Tommy Bahama Interstate 24
Inverter Power: Select the On/Off button to enable the
inverter to power 120 volt AC-powered appliances like
the air conditioner and power outlets/receptacles in and
outside the touring coach� Be aware that if the inverter
is on, even when not using 120 VAC power, it will
still draw and consume a small amount of the house
battery’s charge� When not in use, you can elect to turn
the inverter off to conserve battery power�
Charge Rate Selection: The charge rate defaults to
15 amps (15A) and can be adjusted up or down using
the arrow buttons� The charge rate should be set at or
below the power available at your shoreline connection
but should not be higher as this may cause a breaker
at the shore connection to trip� For example, if your
shoreline connection is 15A and you set the charge
rate to 30A, the system will draw more power than the
shoreline connection can provide, potentially causing
the breaker at your shoreline connection to trip�
There may be circumstances that can cause a breaker
to trip even with it set lower than your power supply�
For example, if you connect at home to a 20A power
supply and set the charge rate to 15A but forget that
something else is running on the same home circuit,
like an appliance that draws 10A� In this situation, your
total draw would be 25A resulting in a tripped breaker
at your home’s breaker panel� Airstream recommends
having a dedicated circuit to prevent interference�
Charging Guidance: Volta takes the guesswork
out of setting up a shoreline connection to charge�
The Inverter Screen displays informative Charging
Guidance below the charge rate selection that can
help you determine which selection to make for your
circumstance� For most situations, you need only
plug into a shoreline connection, and the battery will
charge at the default 15A rate� If a higher charge rate
is available and you want to charge the system faster,
raise the charge rate to match your power source�
MyVolta App
Download the MyVolta app to connect to the Volta
System Bluetooth module installed with the Volta
System� Users in proximity to the Bluetooth module
can monitor system stats on their mobile device,
including:
• Estimated Runtime Remaining
• Pack Temperature
• Charging Status
• Power Usage
• Performance Data
• Warnings, Faults or Errors
Alerts Screen
Use the up and down arrows to navigate and
select alerts to show a description and potential
troubleshooting of the selected alert�
Settings Screen
Use the up and down arrows to navigate through the
available settings� Some settings screens will require a
password� These screens include settings that should
only be adjusted by a Volta approved technician�
Inverter/Charger Screen
The Inverter/Charger Screen displays the various
controls, settings, and status of the inverter/charger�