WARNING: Do not attempt to install this equipment unless you’ve been properly trained.
• To obtain training, please contact your local Fujitsu Airstage Distributor.
• Use this Quick Installation Guide to install Airstage “J-II”
Heat Pump
Systems only. It does NOT replace the Installation Manual.
• Refer to the Installation Manual for complete installation requirements.
• When installing indoor units, always refer to the Installation Manual included with each indoor unit.
• All work must be performed by a qualified person certified under any local, regional, governmental or national regulations to
conduct refrigeration piping work and the handling of R-410a refrigerant.
• The manufacturer shall in no way be responsible for improper installation, start-up, maintenance or service, including failure to
follow all appropriate instructions within the Installation Manual.
• Do not power the indoor or outdoor units until all wiring, piping, evacuation and refrigerant charging work is completed.
• Carefully read the Installation Manual before commencing installation. Observe all local, state, province and or national codes.
•
For Technical Support, please contact:
•
Fujitsu Distributor Technical Service Advisor (TSA)
•
Fujitsu Service Department (973) 575-0381
J-II Heat Pump
Quick Installation Guide
Outdoor Unit and Piping Installation
Refer to the Installation Manual for complete installation details.