C o m m i ssion ing M anu al
T r o u b l esh o o t i n g
29.3. No PC-SPR Network Link
When no network link exists between the PC running WipManage and the
SPR/IDR, the SPR icon is displayed as a green circle and red rectangle ( ) in the
BSR Zoom window. (Note that an air link can exist in such a scenario between the
BSR and SPR/IDR.)
Table
29-3: Solution for no SPR-PC network link
Solution
•
Ensure WipManage management’s IP address is correct.
•
For AS WipLL in the IP router mode, check that the routing table is correctly defined.
•
For AS WipLL in the transparent bridge mode, delete the ARP table (MS-DOS command:
ARP
–d
)
•
Ensure that the SPR/IDR and BSR are configured for the same modes (i.e. IP Router or
Transparent Bridge)
•
Check PC’s routing table for correct routes from BSR to SPR/IDR (MS-DOS command:
route print
):
•
For AS WipLL in the transparent bridge mode, check PC’s routing table for correct routes from
BSR to SPR/IDR (MS-DOS command:
tracert <SPR’s IP address>:
01040311-07
Airspan Networks Inc.
29-3
