C o m m i ssion ing M anu al
E st ab l i sh i n g B S R - S P R L i n k w i t h Au t o C o n n ect
8.3.6. Task 5: Configure "Fixed" SPRs for Redirection
Once you have added a range of fixed
SPR
icons, you need to define for these SPR
indexes the SPR device's Ethernet MAC address of the SPR device that you want
connected to these indexes.
This SPR’s Ethernet MAC address for the SPR index icon, corresponding to the
associated BSR, is stored in the ASWipLL database. After an SPR initially connects
to a BSR using AutoConnect, WipManage searches the ASWipLL database for the
SPR’s Ethernet MAC address. If it locates this address defined for an SPR index,
WipManage then redirects the SPR to the BSR with which this SPR index is
associated.
To define redirection for an SPR:
In the BSR Zoom window, from the Configuration menu, point to
SPRs
, and
then choose
Permitted SPRs
.
1.
The Permitted SPRs Table dialog box appears, as displayed below:
Figure
8-31: Permitted SPRs Table dialog box
01040311-07
Airspan Networks Inc.
8-37
