E st abli shing BS R - SP R L in k w ith Au to Co nn ect
C o m m i ssi o n i n g M an u al
Figure
8-3: AutoConnect after Redirecting SPR to a different BSR
The following lists the chronological process of the AutoConnect feature with
redirecting SPRs to a different BSR:
1.
2.
3.
4.
Once an unconfigured SPR is installed at the subscriber’s site, and then turned
on, it automatically establishes a link with the BSR (
BSR #1
) with the strongest
reception.
The BSR (
BSR #1
) provides the SPR with a temporary IP address (for
communication and configuration).
The SPR sends an SNMP trap to the ASWipLL management station (i.e.
WipManage) notifying WipManage that the SPR has performed an
AutoConnect.
WipManage identifies the BSR (
BSR #2
) in the ASWipLL database to which the
SPR must be connected.
8-6
Airspan Networks Inc.
01040311-07