C h angi ng Li n k f ro m R ou t er to B ridg e
C o m m i ssi o n i n g M an u al
6.8. Task 6: Add SPR in WipManage
When you change the SPR and BSR from the IP router mode to the transparent
bridge mode using WipConfig, WipManage deletes the SPR associated with the
BSR. Therefore, you need to add the SPR again in WipManage.
Before you add the SPR in the BSR Zoom window, you can verify, in this window,
whether BSR is configured for transparent bridging. The figure below displays the
BSR Zoom window, which displays the BSR’s mode as "Bridge". In addition, the
SPR icon contains a check mark (
√
) indicating that the SPR has been deleted.
SPR deleted
from BSR
BSR in bridge
mode
Figure
6-14: Verifying BSR is in bridge mode
In our example configuration, we need to add SPR (
10.0.0.11
) to
SPR index #2
.
6-16
Airspan Networks Inc.
01040311-07
