AirSynergy 2000 Installation Guide
Page 36
Commercial in Confidence
UGD-D01001 Rev B
Figure 20 - Attaching the GPS antenna assembly to AirSynergy
Caution:
Attach the GPS bracket in the displayed position
only
, so as not to
restrict the airflow in any way.
5.5 Securing AirSynergy to the Mounting Plate
Note:
the following procedure can also be performed with the Front-Mount
antenna variants exactly as shown below.
To mount AirSynergy to the universal mounting plate, perform the following:
1. Loosely fit the flange nuts on the studs protruding from the sides of the unit.
Figure 21 - Lift unit to top of mounting plate
2. Hook the studs into the top slots of the mounting plate.
Figure 22 - unit engages into slots on the top of mounting plate
3. With the studs engaged in the top slots raise the unit slightly until the bottom studs also
drop into their respective slots.
