AirStrand 2200 Installation Guide
AirStrand 2200 – Installation Guide
© Copyright Airspan Networks Ltd., 2021
P/N:
DUG01287
Rev. A2, Oct 2021
24
Figure 10: Use 2 Wrenches to Loosen
5.3.2
LED Display
Two LEDs are displayed on the inside of the panel of the unit, providing unit status indication -
reporting system status: System / Access, Backhaul.
These are software controlled to provide a visual indication to the Installer and is illuminated once
power is applied to the unit. It can be turned off during normal operation.
There are two (2) LEDs on the unit:
Backhaul LED – indicates if the unit is connected to the network
System LED – see table below
Table 8: System LED Function
State
Name
LED
Color
LED State
Description
Powering
Up
White
On Continuously Till running from operational SW image
Software
loading /
Startup
Green
Blinking (3Hz)
Till SW startup is finished and the product is
ready to radiate
Normal
operation
Blue
On Continuously
Normal operation (radiating).
During normal operation the LED will turn-
off after 10 min
Critical
alarm
Red
On Continuously Service affected
Major
alarm
Orange
On Continuously Service not affected
