AirHarmony-4400 (External Cavity Filters) Installation Guide
UGD-D01186
Airspan Commercial and Internal Use
53
5.5.2
Securing Connector Clamp
Warning:
Required – For safety reasons it is imperative to secure the power cable with
the Connector clamp after connection. This is to prevent manually disconnecting the
power cable.
After the power cable is connected securing the connection is required.
1.
This is performed by inserting the 2 – M4 x 12 screws into the provided holes and
tightening the screws. The clamp covers the connector and prevents access to the
connection so it cannot be opened without difficulty.
Figure 54: Securing the connection
