Air4G Installation Guide
Page 64
Commercial in Confidence
UGD-D00229 Rev B
Figure 59 - Management IP Configuration
2. Define the
IP address
.
3. Define the Subnet Mask.
4. Define the Default GW MAC Address.
Caution:
Define Default GW only if required for Network Security. Consult with
Provider.
1. Set the
Management VLAN
set to Untagged. Set to Tagged when with VLAN Tag ID.
Consult with Provider.
2. Define the
VLAN Tag ID
– only when Management VLAN is set to Tagged. Consult with
Provider.
3. Click
Submit
. (Read Current = ignore/no action)
Caution:
After
Submit
changes are applied
immediately to the BS. Therefore the
PC must now be re-configured to the new configuration (IP address and Subnet
mask) to re-establish communication.
1.
Return to
BS Action
.
2.
Select
Reset BS
from the dropdown list.
3.
Click
Submit
to perform a reset of the BS.
8.1.4 BS Operational State
Note:
Leave settings on BS Operational State as is. No configuration is required.