36
●
Lose SD-Card Alarm
: Set alarm triggered ON/OFF if the SD-Card is lost (removed).
Figure 7.7
●
Alarm Input
: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode
to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).
Figure 7.8
●
Action with Alarm
These are actions optional for external alarm triggered.
Figure 7.9
4.6 Basic Network Settings
Click ”
Basic Network Settings
” to enter the interface:
●
Media Port
: Default is 38401.
●
Web Port
: Default is 80.
●
Mobile Port
: Default is 2012.
●
RTSP Port
: Default is 554.
●
IP Address
: Set the IP address of camera.
●
Subnet Mark
: Default is 255.255.255.0.
●
Gateway
: Set the gateway of IP camera. If the camera connects to an extranet via a router, then the
gateway is the router’s IP.
NOTE:
Don’t change the
Media Port
,
Web Port
,
Mobile Port
,
RTSP Port
if not necessary.
Summary of Contents for XX39A
