AirSep Onyx, Instruction Manual, Page: 11 / 102

AirSep
®
Corporation
Onyx/Onyx+/Onyx Ultra Instruction Manual 2-1
2.0 Safety
2.1 General
Oxygen, the most abundant of the elements, makes up approximately 50 percent
of the earth’s crust. In its free state, oxygen forms approximately one-fifth of our air by
volume. Although classified as a non-flammable gas, oxygen supports combustion.
As an active element, it combines directly or indirectly with all elements except the
rare gases. Oxygen is an invisible gas that is colorless, odorless, and tasteless.
To ensure your safety, thoroughly read and familiarize yourself with this entire
section of the instruction manual. In addition, AirSep Corporation strongly
recommends that you review this section periodically.
2.2 Potential Hazards
Oxygen vigorously accelerates the burning of combustible
materials. In an oxygen-enriched atmosphere, many materials
that do not burn in normal air require only a slight spark or
moderate heat to set them aflame.
To avoid fire or an explosion, keep gasoline, kerosene, oil,
grease, cotton fibers, paint, and any other combustible material
away from any part of the oxygen generator.
Do not smoke or use an open flame near the oxygen system.
Post “NO SMOKING OR OPEN FLAMES” signs in the area
where the oxygen system is located. AirSep Corporation
STRONGLY recommends that only individuals trained and
experienced in the safe handling of oxygen operate this unit.
Take extreme care to keep all oxygen piping and vessels clean.
To avoid fire or explosion, oxygen-clean all surfaces that can
come in contact with the product oxygen. Check all oxygen fittings
for leaks with an oxygen-compatible, leak-detecting solution.
To prevent fire or electrical shock, locate the oxygen generator
indoors, away from rain or any other type of moisture.