18
Centrox Instruction Manual
AirSep Corporation
Circuit Breaker Reset Buttons
The individual circuit breaker reset buttons on the compressor module are used to
reset the compressors after an electrical overload shutdown (See Figure 4.1).
4.2.2. AIR INTAKE FILTERS
Located on the left side panel, the air intake filter removes any foreign particles
from the air that enters the compressor module (See Figure 4.1).
Fuses/Circuit Breakers, if required, must be replaced with the same
type and amp rating as the original.
4.2.3. PSA MODULE
Figure 4.2 shows the controls and indicators of the PSA concentrator module.
Feed Air
Pressure Gauge
Product
Pressure Gauge
Low Purity
Light
Low Purity
Alarm
On/Off
(Power)
Auto/Manual
Switch
Hour Meter
Figure 4.2:
PSA Concentrator Module Controls and Indicators
