AirSep AS-Q, Instruction Manual

Page: 17 / 198

AS-Q—AS-Z Series Instruction Manual 17
AirSep Corporation
4.0 Components Description
The drawings in this section illustrate the location of the main components of the
various oxygen generator models. All models include similar components unless
noted otherwise; however, the location and size of these components varies
among the different models. Refer to the Appendix for general layout drawings and
specifications for all the oxygen generator models referenced in this instruction
manual. In addition, the oxygen generator requires use of an oxygen receiver to
provide stable flow and concentration for short-term surges of feed oxygen above
the rated capacity of the oxygen generator.
4.1 EXTERNAL COMPONENTS
Figure 4.1 below illustrates the external components viewed from the front of the
oxygen generator.
Adsorber Vessels
Equalization Manifold
Product o/p Manifold
Control Panel
Filter Assembly
Feed & Waste Manifold
Pressure Transducer
for Bed A (PT2)
Pressure Transducer
for Bed A (PT3)
Pressure Transducer
for Bed A (PT4)
Figure 4.1: External Components — Front View