AirSep AS-1000, Instruction Manual, Page: 80 / 91

12/02 AirSep
®
Corporation
B-2 AS-20—1000 Instruction Manual
Limits of Liability
THE FOREGOING WARRANTY IS THE ONLY WARRANTY MADE BY AIRSEP
WITH RESPECT TO THE EQUIPMENT (OR ANY PART THEREOF) AND IS IN
LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, IN FACT OR IN
LAW, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. IT IS
EXPRESSLY UNDERSTOOD THAT THE SOLE AND EXCLUSIVE REMEDY FOR
ANY DEFECT IN PARTS OR WORKMANSHIP IS LIMITED TO ENFORCEMENT
OF AIRSEP’S OBLIGATIONS AS SET FORTH ABOVE, AND AIRSEP SHALL NOT
BE LIABLE TO ORIGINAL PURCHASER OR ANY OTHER PARTY FOR LOSS OF
USE OF THE EQUIPMENT, LOST PROFITS OR FOR ANY OTHER SPECIAL,
INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (EVEN IF AIRSEP
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES).
AirSep oxygen generators are sold for use in industrial
applications only. Contact AirSep Corporation or an authorized
AirSep Corporation representative before you use this unit for
any medical application.
Returning the Oxygen Generator or a Component for Service
If the oxygen generator or a defective part requires service, contact your distributor.
If instructed by your distributor to contact AirSep Corporation, follow the procedure
below to return the oxygen generator or a component for service or credit.
1) Obtain a Return Goods Authorization (RGA) number from the AirSep
Commercial Products Service Department. (Refer to Chapter 8,
Troubleshooting for information about contacting AirSep Corporation.)
Before you call for service assistance, have the following information readily
available:
Oxygen Generator Model
Serial Number
Hours of Use
Invoice Date
AirSep Corporation issues no credit for any warranted item until
you present the model number, serial number, and invoice date
of the oxygen generator, and defective part is returned to
AirSep Corporation.
2) Write the RGA number clearly on the outside of the shipping container.