AirSep AS-1000, Instruction Manual

Page: 28 / 91

12/02 AirSep
®
Corporation
5-4 AS-20—1000 Instruction Manual
Model Feed Air Inlet Connection Size Feed Air Hose Size
AS-20,
AS-45 ¼” NPT female bulkhead fitting with a ¼” NPT
male x ¼” NPSM ball-end joint adapter ¼” ID minimum
AS-80
¼” NPT female bulkhead fitting with a ¼” NPT
male x
⅜ ” NPSM ball-end joint adapter
⅜ ” ID minimum
AS-160,
AS-250 ½” NPT female bulkhead fitting with a ½” NPT
male x ¾” NPSM ball-end joint adapter ½” ID minimum
AS-450
¾” NPT female bulkhead fitting with a ¾” NPT
male x ¾” NPSM ball-end joint adapter ¾” ID minimum
AS-750 1” NPT Female fitting next to V-2 1” ID minimum
AS-1000 1” NPT Female fitting next to V-2 1” ID minimum
Table 5-1 Feed Air Connection Sizes and Hose Sizes
2) Install your oxygen receiver. If AirSep Corporation provided your oxygen
receiver, assemble the receiver as follows (See Figure 5-2.):