AirSep AS-1000, Instruction Manual, Page: 25 / 91

AirSep
®
Corporation 12/02
AS-20—1000 Instruction Manual 5-1
5.0 Installation
5.1 Handling and Unpacking
AirSep Corporation ships the oxygen generator on a wooden skid covered by a
container. The container also includes an accessory box containing all the
accessories for the unit and an instruction manual needed to install the unit
properly. The oxygen receiver, if supplied, is shipped on a separate skid.
To unpack the oxygen generator, follow these guidelines:
1) Inspect the shipping container, and open it immediately upon receipt.
2) If the exterior of the carton is severely damaged, note it on the freight bill
before you sign it.
You must submit a damage claim within 24 hours of receipt .
In the case of concealed or hidden damage, a claim must be
filed
within 15 days of receipt . A claim can be filed only by
the consignee. The AirSep Product Warranty does not cover
shipping damage.
3) Unpack the unit, and remove any protective wrapping and packaging. Retain
the carton and packaging to facilitate future shipping and transporting of the
unit.
4) Place the unit in an upright position, and thoroughly inspect the enclosure
and all external components (e.g., control panel) for damage.
5) Open the enclosure or control panel, and inspect the interior for loose or
damaged parts.
To prevent electrical shock, make sure the main power supply
is disconnected when you remove the enclosure, inspect the
internal components, and install the oxygen generator and
oxygen receiver.
6) Inspect all wiring to ensure that no wires are broken and no push-on
connector is off its terminal. If a wire is disconnected, reconnect the wire to
the most obvious terminal.
7) After inspecting the interior, close the enclosure or control panel on the unit.
8) Locate the instruction manual inside the accessory box. Read the entire
manual before installing and operating the unit.