User’s Manual – A16 J A18 J Series
Page 37
4.
INSTALLATION AND PRELIMINARY CHECKS
The machine is supplied completely assembled, therefore it can perform all functions in full safety as provided for by the
manufacturer. No preliminary operation is required. To unload the machine, follow the instructions in chapter “handling
and carrying”.
Place the machine on a sturdy enough surface (see paragraph
3.3.5
) and with a gradient below max. allowed gradient
(see technical features “Stability limits”).
4.1.
Familiarizing with the machine
Anyone wishing to use a machine with weight, height, width and length characteristics that significantly differ from the
training received must be updated in order to cover the differences.
The employer shall be responsible for ensuring that all operators working with the equipment are adequately trained and
aware of the applicable health and safety legislation.
4.2.
Preliminary controls.
Before using the machine read the instructions in this manual and the short instructions reported on the manufacturer's
plate on the platform.
Visually check for perfect integrity of the machine and read the plates showing machine operating limits.
Before using the machine, the operator is to carry out a visual inspection to ensure that:
Make sure the battery is fully charged and the fuel tank is full.
The oil level lies between the min. and max. value (with lowered platform).
The ground is sufficiently flat and solid.
The machine carries out all operations safely.
The wheels and drive motors are properly installed on the machine.
The wheels are in good conditions.
The guard railing is fastened to the basket and the gate/s are in automatic closing mode.
The structure does not show any visible faults (visually check the welding beams of lifting structure).
The instructions plates are perfectly readable.
The control panel on the basket, the emergency control panel on-ground, and the deadman pedal, are perfectly
efficient.
The anchoring points for the harness are in perfect state of conservation.
Do not use the machine for purposes different from those it was intended for.
Summary of Contents for A16 J Series
