Page 8 of 23
USER MANUAL
ADS intelligent
Softwareversion:
0.95
8
Screen the beginning after turning on the ADS intelligent
1.
Shows that schematic image of the patient mattress
colours are like:
red: pressure inside the cells is out of tolerance (±40%)
yellow : pressure inside the cells is out of tolerance (±20%)
Green : pressure inside the cells is in the Lord range
The 18 small in the centre of the patient mattress an augury will be shown if pressure
inside the cell is out of tolerance:
+ : pressure inside the cell is higher than the given value
- : pressure inside the cell is lower than the given value
2.
This symbol shows that choosing patient's weight - class.
3.
This symbol shows to enter the "settings"
4.
Alarm signal. It will be shown in the case of the or in the case of a deviation of
normality. In the case of warning the colour will be "yellow". In the case of an alarm,
will be "red". For a detailed listing of all warnings and alerts please check the chapter
about "warnings and alarms". (Alarms ).
5.
This symbol shows movement monitor. The movement monitor records and shows the
movements where the small 18 measurement-cells have been involved (in this current
picture the last 11 minutes after on the device are shown) The higher of the public
1
4
3
2
2
.
5
6
7
