Page 4 of 23
USER MANUAL
ADS intelligent
Softwareversion:
0.95
Please note:
The device should not be used in environments where flammable gases are used.
You will use the device only there, where guarantee is set, that there are no
flammable gases in the area or ambient air.
Please note:
The device should not be covered. There is a danger, in case the device is covered.
The heat will accumulate.
Please note:
Alarm-function will only work when ADS intelligent is conneted to the electricity
supply system. If the electricity supply system has been switched off or has failed
and the ADS intelligent was temporarily switched off, you have to turn the ADS
intelligent on again to make sure, that the alarming system of the ADS int elligent
will work fine.
Please note:
Never place a patient on the mattress before the filling process is completed
and the ADS
intelligent
indicates that the system is operational. The patient
may not guaranteed bed sores by pressure relief at the filling process and
missing volume fill early. The ADS intelligent features a log system, that
duration, the error code, the set weight, cycle time and counter-pressure of
the patient records.
3
Operational location
The device's operational location is perpendicular to the foot end of the bed on the ground or
for setting up and operating the device briefly hanging on the foot of bed - only and
exclusively to operate the device and not during the use.
On behalf of security reasons it
should be established, that no humidity can run inside the device!
These locations are
featured as construction vibrations and vibrations of some patients can be experienced as
disturbing. The transfer of vibrations and noise is thereby limited. The device can also be used
in landscape situations.
4
Cleaning / Disinfection
For the killing of germs and bacteria, the device can de disinfected with a suitable
disinfectant. The company AirMedPLUS uses itself the product ANTISEPTICS Poly-Alcohol
skin-colorless-antiseptic.
