page 14 of 22
Version 1.4 – June 2015
- ADS_Clinic Operator Manual _V1_4_Mai 2015_Software 1_20_ENG.doc
Choice of operating mode
The ADS
clinic
has two operating modes to select i.e.:
“Static mode” and “Alternating mode”
Static mode
The symbol identification in the display of the mode:
By pressing button (3) the function “Static mode” of the ADS clinic is selected and the
operating will start. In this function, the ADS clinic works like a therapeutically static
function. All cells are filled with the same selected pressure, via the set weight of the
patient.
In static therapeutic function and the carefully selected weight of the patient, the patient
descends deeper in the mattress. By increasing the surface, the pressure load is spread
over multiple planes, and for the individual the risky areas of the body reduced.
Alternating mode
The symbol identification in the display of the mode:
By operating, key
(4)
, the function of the ADS
clinic
changes into a three room alterna-
ting pressure system. By a user-set interval time (3-30 min., set in steps of one minute)
the cell pattern A-B-C-A-B-C.. will, for the duration of the set interval time, inflate the
cells A and B, C not. After the interval time, cell A is deflated, cell B remains filled, and
cell C will be inflated. At the end of the next interval time, cell B will be inflated, cell C
remains fill and cell A is refilled. The filling/deflating of cells causes 'air flow sound‘, by
the so-called ‚Airshifting‘ procedure. At ' Airshifting ' is the volume moved from one room
to another room. So has the ADS
clinic
on short interval times for a momentary peak
load.
Nursey mode
By simultaneous pressing of buttons
(8)
and
(9)
for approximately three sconds you will
enable or disable the "nursery mode". "Nursery mode" means, all cells will be inflated with
maximum pressure for maximum 20 minutes. In the display, you will see the icons „Rest“
und „MAX“ (flashing), see picture:
After 20 minutes in "nursery mode", „ADS clinic“ will turn
automatically back to the previous mode before enabled the
"nursery mode". The remaining time is shown into the display
with the word „Rest“. If nursery mode is enabled, you can turn
into the previous mode at any time by pressing the buttons
(8)
and
(9)
simultaneously for approximately 3 seconds.
