Art nr. 66.000.000.16
1
Instructions Manual-Gebruiksaanwijzing-Manuel d'instruction
EN - Important instructions
1. Read all instructions carefully before you use the appliance.
2. Remove the packages and ensure that the appliance is undamaged. In case
of doubt do not use the fan and contact with your supplier.
3. Do not let children play with parts of the packages (such as plastic bags).
4. Before plugging to the socket, check that if the voltage of your main supply
matches the voltage marked on the rating label of the appliance.
5. Before assembling or dismantling the fan, must sure that the fan is unplugged.
6. Before unplugging the power cord, turn off the switch.
7. Do not insert any object into the guard while the fan is operating .IT WILL
CAUSE INJURY TO THE PERSON.
8. The fan shall be used for temperate climates, do not use the fan at the high
humidity area or dusty area. Do not use the fan where acid or alkali is stored.
9. Do not hang any clothes on the fan guards.
10. Do not use the fan outdoors.
11. Do not continuously to blow the baby or the patient directly for a long time.
12. The appliance is not intended for use by young children or infirm persons
without supervision.
13. Young children should be supervised to ensure that they do not play with the
appliance.
14. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Parts of description
1. Front cover
2. Louver
3. Louver cap
4. Blade
5. Base
6. Feet
7. Rear cover
8. Control panel
Caution
This appliance is for household use only. Any
servicing other than cleaning and user maintenance should be performed by
authorized service representative. Do not immerse the unit in water. To reduce the
risk of fire or electric shock, do not remove the housing, no user serviceable parts
inside. Only authorized service personnel shall handle repair work. If the supply cord
is damaged, it must be replaced by the manufacturer or its service agent or a similar
qualified person in order to avoid a hazard.
