Q:
I have a remote AP ,how to extend the coverage of the remote AP by
WL-5460APv2?
A:
Please get into the web management of WL-5460APv2 and set WL-5460AP2 as
Universal Repeater mode.
When you configure WL-5460APv2 as Universal Repeater mode, WL-5460APv2 could
connect to the remote AP with AP mode.
While WL-5460APv2 and the Remote AP are connected, they must meet the
followings:
1. WL-5460APv2 support 802.11b+g mode, so Remote AP should also support
802.11b/g mode.
2. The Channel and security setting of WL-5460APv2 is the same as the Remote AP.
3. The SSID of Extended Interface is also the same as the Remote AP
Please follow the following to connect WL-5460APv2 to Remote AP:
1.
Please power on WL-5460APv2 and connect your PC to the LAN port 1 of
WL-5460APv2 wired.
2.
Please get into the web management of WL-5460APv2.
3.
Please set WL-5460APv2 as Universal Repeater mode and set the security
settings as the same as Remote AP .
