AirLive SNMP-FSH2602MG User’s Manual
34
Figure 4-13 Trunking State Activity
Active
(select)
:
The port automatically sends LACP protocol packets.
N/A
(no select)
:
The port does not automatically sends LACP protocol packets, and
responds only if it receives LACP protocol packets from the opposite device.
Note:
A link that has either two active LACP ports or one active port can perform dynamic
LACP trunking.
A link has two N/A LACP ports will not perform dynamic LACP trunking because both
ports are waiting for and LACP protocol packet from the opposite device.
If you are active LACP’s actor, when you are select trunking port, the active status will
be created automatically.
Filter Database
(Administrator menu)
IGMP Snooping
The SNMP-FSH2602MG supports multicast IP, one can enable IGMP protocol on web
management’s switch setting advanced page, then display the IGMP snooping information
in this page, you can view difference multicast group, VID and member port in here, IP
multicast addresses range from 224.0.0.0 through 239.255.255.255.
