Package Contents
l
One 5-Port 10/100M Ethernet Switch
l
One AC Power Adapter
l
One Quick Installation Guide
Congratulations on your purchase of the 5-Port 10/100M Mini Switch.
This switch integrates 100Mbps Fast Ethernet and 10Mbps Ethernet
network capabilities in a highly flexible mini package.
P/N:1907050
Ports 1-5
At the rear site of the Switch, ports 1-5 are where you will
connect your Computers to the Switch
Power
At the left site of the Switch, the power port is where you
will connect the AC power adapter. Be sure to only use
the AC power adapter that came with the Switch.
The 5 UTP/STP ports support automatic
MDI/MDIX crossover detection function
gives true ‘plug and play’ capability, with
the Auto-MDI function, you just need to
plug-in the network cable to the switch
directly and no need to care if the end node is NIC (Network Interface
Card) or switches and hubs.
Connect the Switch’s AC power adapter to the Switch’s
Power port. Plug the other end of the adapter into an AC
outlet. When connected the AC power adapter to the
switch’s Power port and AC outlet will immediately
power on this Switch.
When the Switch installation was completed, check on the LED
indicators for the status.
POWER
This indicator lights green when the switch is receiving
power.
Link/ACT
This indicator light green when the port is connected to a
station, if the indicator blinking will be transmitting or
received data on the network.
Standards
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Full-duplex flow control
Ports
5 x UTP/STP Auto-MDIX ports
Transfer Rate
Ethernet 10Mbps/20Mbps
Fast Ethernet 100Mbps/200Mbps
Performance
Non-blocking full wire speed
Power
7.5VDC/1A
EMI
FCC Class B/CE Mark B/VCCI-B
