Ver. 1.0
Section 1
Hard Drive Installation
Step 2
Pull out the front panel.
Step 3
Put the 3.5-inch IDE hard drive into the plate, and connect the IDE and
power cables to it.
Package Contents:
•
Home NAS
•
Vertical Stand
•
Power adapter
•
Ethernet Cable
•
USB Cable
•
Manual CD
•
Quick Installation Guide
•
Screws (4)
Quick Installation Guide
WARNING:
Step 1
Unfasten the two screws at the rear side of the device, and pull out the
back cover.
This Network Attached Storage device is not hot-swappable. Please make sure that
it is turned off and not connected to the power outlet when performing the following
assembly procedure.
Model # ANAS250
Home NAS
3.5” IDE Network Attached Storage