Grounding Procedure (For Flammable Materials Only)
8
3A4637A Operation, Repair, Parts
Grounding Procedure
(For Flammable Materials Only)
1. Position striper so that the tires are not on pave-
ment.
2. Striper is shipped with a grounding clamp. Ground-
ing clap must attach to grounded object. (e.g. metal
sign post).
Pressure Relief Procedure
Follow the
Pressure Relief Procedure
whenever you see this symbol.
1. Perform
Grounding Procedure
if using flammable
materials.
2. Set pump switch
OFF.
Turn engine
OFF
by pressing
the engine kill switch at the controls, or by moving
the lever on the engine.
3. Turn pressure to lowest setting. Trigger gun to
relieve pressure.
4. Engage the trigger lock. Turn prime valve down.
5. If you suspect the spray tip or hose is clogged or
that pressure has not been fully relieved:
a. VERY SLOWLY loosen tip guard retaining nut
or hose end coupling to relieve pressure
gradually.
b. Loosen nut or coupling completely.
c. Clear hose or tip obstruction.
This equipment must be grounded to reduce the risk
of static sparking. Static sparking can cause fumes to
ignite or explode. Grounding provides an escape wire
for the electric current.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury
from pressurized fluid, such as skin injection,
splashed fluid and moving parts, follow the
Pressure
Relief Procedure
whenever sprayer is stopped and
before sprayer is cleaned or checked, and before
equipment is serviced.
ti30387a
ti30388a
I
O
I
O
ti30389a
ti30107a