34 - Troubleshooting
Concise User’s Guide
English
Troubleshooting
Problem
Possible Cause - Solution
The DVD regional codes
can no longer be
changed.
The code has been changed the maximum 5 times.
DVD region detection is device dependent,
not OS-dependent. You can select your module’s region code 5 times. The fifth selection is
permanent. This cannot be altered even if you change your operating system or you use the
module in another computer.
The
TouchPad
doesn’t
work.
The TouchPad has been disabled
. Press the Touchpad toggle (
Fn + F1
) key combination (make
sure you have installed the Touchpad driver.
The
sound
cannot be
heard or the volume is
very low.
The volume might be set too low.
Check the volume control in the
Volume Control Panel
in the
Windows
taskbar, or use the key combination
Fn + F5/F6
to adjust
(see
).
The
Wireless LAN/
Bluetooth modules
cannot be
detected
.
The modules are off.
Check the appropriate LED indicator
to see if the modules are on or off
(see
). If the LED indicator is off, then press the appropriate function
key combination in order to enable the modules.
The
PC Camera
software
displays a black
screen when the
PC
Camera
software is run.
The software is using the incorrect device
. If you have both an optional PC Camera and an option-
al TV Tuner module present, you will need to select which device to use with the
BisonCap
pro-
gram. Go to the
Devices
menu in the
BisonCap
program and select the
BisonCam, NB Pro
device.
M570RU Concise UG Vista.book Page 34 Monday, November 5, 2007 9:46 AM
