background image

80001028 

– Issue 1 10/21 


 

1.7 Shipping 

All manufactured devices are shipped from the factory after all tests and checks have been 
carried out before shipment. The shipping must be carried out by trained and experienced 
personnel and the necessary safety precautions should be taken to prevent the overturning 
and slipping of the device. When shipping the devices, it should be ensured that the weight 
is evenly distributed over the four corners and not unbalanced.  
 
 
 
 
 
 
 
 
 
 
 
Packaging information Is displayed below: 
 

Table 1: Packaging Information 

Model  

Packed 
Quantity 

Box  Dimensions  (LxWxH) 
(mm) 

Weight(Kg) 

90001459  1 

410x355x1045 

42 

90001460  1 

560x515x1160 

48 

 

2.0 Disposal 

In section 2.0 information about the safe and responsible disposal of the unit is included.  
Dispose of all components and filters in an environmentally friendly manner in accordance 
with the local codes, practices, and guidelines. An authorized specialist waste processing 
company must dispose of the unit or the individual components. The appointed contractor 
must ensure that the components are separated according to material type. 
 

2.1 Filter Disposal  

The filters of the unit can be considered toxic and harmful to the environment once they are 
due for replacement. Please dispose of these in the most appropriate manner to the local 
authority.  
 

2.2 Electrical Connection 

The product does not contain batteries, in the event of the failure of the unit try a different 
plug and dispose of the one that came with the unit in a manner that is acceptable to the 
local authority. It can be disposed as you would any other retail plug.  
 

2.3 Recycling 

Metal components of the product may be recycled, always check with your local disposal 
outlet which parts can or can’t be recycled in your area.   

Warning: 

When transporting the unit, carefully observe its behavior and 

stay clear of any possible hazardous areas. It must be ensured that the 
means of transport/lifting is suitable to accommodate the required weight 
and size capacity. Never stand beneath suspended loads. Never try to lift 
weight you cannot reasonably carry. Watch hands and fingers when lifting 
or dropping the box to its side. Be careful in the transportation of the unit 
that it is not dented in transit.  
 

Summary of Contents for 90001459














Reviews: