7106A and 7108A
MaxAir
Wall
Exhaust Fan
Installation Instructions / Warranty Card
© Clipsal Australia Pty Ltd
2 of 4
Check that the proposed location of the
1.
fan will not foul joists, existing wiring or
other internal wall features (wall thickness
between 110 and 310mm). Use template
provided to mark out hole. Cut a hole
through the wall ø230mm. Screw fan
assembly to internal wall via four corner
openings, see Figure A, (appropriate
fasteners to be used for each installation
not provided).
2. Remove termination cover see Figure B,
(screws marked with ‘1’, ‘2’, ‘3’).
4. With fan assembly mounted on the internal
wall, cut PVC sheet to suit wall depth.
7106A Connection Diagram
External
Isolating Switch
External
Isolating Switch
7108A Connection Diagram
1
2
3
Figure A
Figure B
Fan
Assembly
Screws
labelled 1, 2,
3, retain the
terminal cover
to the chassis.
3. Electrician to make electrical connections
as shown, using three core, 1mm
2
cable.
Replace termination cover.
Figure C
MOTOR
MOTOR
YL
YL
A/P
A/P
RD
RD
N
N
GR
GR
E
E
1
1
2
2
BK
BK