background image

1

INSTRUCTIONS FOR INSTALLATION AND USE 

Ceiling Fan Model Cyrus (FN44444) 

BEFORE YOU START

Proper use:   

-

  This product is intended exclusively for non-commercial use as ceiling fan. 

-

  The product has to be installed and used in accordance with these instructions. 

-

  Any use of this product that is not in accordance with these instructions will void the legal 

warranty of the manufacturer. 

Please keep the original carton and packaging material as the warranty will only be honored if product 
is returned in complete original packaging. 

FOR YOUR OWN SAFETY

General safety instructions: 

-

  For the safe use of this product, you need to have read and understood these instructions 

before installing or using the product. 

-

  Please follow all safety instructions! If you ignore these safety instructions, you will endanger 

yourself and others. 

-

  Keep these instructions for future reference. 

-

  All parts of this product have to be installed properly in order to ensure safe operation. 

-

  Modification of the product and use of non-approved parts are prohibited. 

-

  This product is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been 

given supervision or instruction concerning the use of the product by a person responsible for 

their safety. Children should be supervised to ensure that they do not play with the product. 

Electrical safety: 

-

  The electrical installation must be performed by a qualified electrician and must be in 

accordance with national and local regulations. 

-

  Use a fault-current circuit breaker with a rated residual current of no more than 30 mA. 

-

  Make sure to install an all-pole disconnection switch having a contact separation of at least 

3mm between poles in the supply wiring to the ceiling fan. 

-

  Before connecting the appliance to the electrical grid, make sure that it will only be operated 

within the specified parameters. 

-

  The fan must be properly grounded to avoid the risk of electric shocks. 

-

  Switch off the power before connecting, repairing or cleaning the fan. 

-

  Install only bulbs of the type intended for your fan. 

Storage and transport: 

-

  Always store the fan in a dry environment. 

-

  Protect the fan from damages during transport. 

F   A   N        C   O

161031

Summary of Contents for Cyrus







Reviews: