Dry Cooler
Condensers
4
Introduction
Dry Coolers Technical Manual 9308503 V2_06_2020
General Specification
Unit Identification
DR
12
H
DR
Dry Cooler – Water / Glycol
10 - 95
Model Size (expressed as Total Heat Rejection in kW)
H
Horizontal Air Discharge
V
Vertical Air Discharge
Introduction
This range comprises of 14 air cooled dry cooler models with total heat rejection 10 – 95
kW
Custom designed for a small footprint, low sound level, slimline and aesthetically
pleasing appearance.
Available in either horizontal or vertical air discharge orientation,
please specify at order
.
All units are dispatched following extensive leak and pressure testing and carry a holding
charge of inert gas.
CE Directive
Airedale certify that the equipment detailed in this manual conforms with the following
EC Directives:
Electromagnetic Compatibility Directive (EMC)
2014/30/EU
Machinery Directive (MD)
89/392/EEC in version 2006/42/EC
Pressure Equipment Directive (PED)
2014/68/EU
To comply with these directives appropriate national & harmonised standards have been
applied. These are listed on the Declaration of Conformity, supplied with each product.
Pressure Equipment Directive
Maximum and Minimum Operation Temperature (TS) and Pressure (PS)
Waterside
Allowable Temperature Range (TS), = Min -20°C* to Max 55°C**
Maximum Allowable Pressure (PS), = High Side 10 Barg
*Based on the waterside temperature in the unit off state in the lowest permitted ambient temperature.
**Based on the waterside temperature in the unit off state in the highest permitted ambient temperature.
