P A R A M E T E R R E F E R E N C E ( T D M 8 8 0 I S P E C I F I C P A R A M E T E R S )
Figure 7 Alerting - Mobile Parameterisation view
Explanation of parametrization:
• The
IO parameterisation
area allows binding between external IO line to trigger alert condition. The target alert
can be selected.
• In the
Alerts
area there are 32 individual alerts which can be configured using the shown dialog to:
• Send a status message on alert
• Send an SDS-4 on alert
• Configure the message contents and destination address
In addition to the previous, messaging can be configured (using the
Handling
field) to:
• Try to send once on alert
• Send messages as long as the alert is active - for example, IO line is active
• Send until sending is accepted by the network
• Require an acknowledgement for the alert message
For alerting conditions the feature can also be configured to:
• Include Alert statuses into LIP messages’ extended user data field
• Allow alert acknowledgements from all numbers (not only the destination numbers)
