DRS24 Technical Service Manual
Section 1.0 : Motor Driver Replacement
3
Fig. 3
Loosen, do not remove, the two M3x12 screws (F), (fig. 3), on each side of the driver you’re
replacing. Slide driver to the left and lift out of machine.
Locate the new driver and remove plastic cover (fig. 4). Grasp the heatsink in one hand and
plastic cover in the other. Gently squeeze the center semi-circle feature of the plastic cover to
unlock and slide it off the front of the driver.
4
3
F
Fig. 4
