6314056 20190829
Bison International B.V. - P.O. Box 160 - NL 4460 AD Goes
1
maximumagainstmoisture.com
Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products are applied, we assume no responsibility for the results
obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is always at your disposal for any advice needed.
Practical refill bag for refilling air Max® Moisture
absorber
air Max® Moisture absorber
6314056 - Air MAx® Moisture Absorber originAl 900 g l246
Directions for use:
INSTRUCTIONS FOR USE – REPLENISHING WITH REFILL BAG OR MOISTURE
MAGNET
1. Cut the packaging open carefully and take out the refill Bag or Moisture
Magnet.
2. Remove the lid from the device and place the refill Bag or Tab in the container.
Attention: make sure the bag does not stick outside the device.
3. Replace the lid and Moisture Absorber is ready for use.
4. Place the device on a solid and stable surface.
5. Moisture Absorber is easy to empty once the salt has completely dissolved
(dispose the empty refill bag). See separate instructions for emptying the
device.
6. Replenish with a new refill.
INSTRUCTIONS FOR USE – REPLENISHING WITH CRYSTALS
1. Cut the packaging open carefully.
2. Remove the lid from the device and evenly distribute the crystals in the
container untill the ‘MAX’ indicator.
3. Replace the lid and Moisture Absorber is ready for use.
4. Place the device on a solid and stable surface.
5. Moisture Absorber is easy to empty once the salt has completely dissolved.
See separate instructions for emptying the device.
6. Replenish with a new refill.
EMPTYING THE DEVICE
Open the device indoors over the toilet and empty the reservoir. Rinse the toilet
well with water.
Important: Spilled liquid can cause staining. In case of stains wash immediately
with plenty of water
and dab thoroughly dry. Repeat if necessary. Avoid contact with leather and
metal: these
materials are at risk of damage.
stains/residue:
Spilt fluid can cause surface marks. If fluid is spilt, it should be
cleaned immediately using large volumes of water and dabbed repeatedly until
dry. Avoid contact with leather, wood, stone and metal, as these materials can
be affected negatively.
Advice:
Always place the Air Max® Moisture Absorber Original on a flat and
stable surface.
Points of attention:
At lower temperatures the Moisture Absorber works more
slowly and clumping can occur. Increasing the temperature will speed up the
working again. Avoid spilling of refill or collected moisture: leather, wood, stone
and metal can be affected negatively.
technicAl sPecificAtions
chemical base:
Calcium chloride
colour:
White
specifications:
Water absorption: about 1 gram of water per gram of salt.
ProDuct DescriPtion
Practical refill bag for refilling Air Max® Moisture Absorber
fielD of APPlicAtion
Practical refill bag for refilling Air Max® Moisture Absorber
ProPerties
· Protects your valuables against moisture
· Ready to use refill bag
· Uses no energy
· Refreshes the air
· Works clean
· Works silently
APPlicAtion
coverage:
900g works for approximately 3 months in a room up to
approximately 90 m³ and absorbs with a filling of 900g approximately 1 litre of
water, depending on the temperature, humidity and size of the room.
