7.6.
Setting Inlet Opening
AMP900
The inlet opening area can be adjusted and fixed at the top
of the front cover using a cover plate.
• Switch off the air handling unit.
• Disconnect from mains electricity.
• Open front cover.
• Slacken the nuts on both sides of the lower part of
the inlet opening by one turn.
• Adjust the cover plate to suit.
• Tighten the nuts on both sides of the lower part of
the inlet opening.
• Close the front cover.
• Reconnect to the mains and start the unit.
Inlet opening fully open = low inlet velocity:
Cover plate half closed = medium inlet velocity:
Cover plate fully closed = high inlet velocity:
AML100, 300, 500 and 800, AMP300, 500 and 800
The inlet opening louvres can be bent slightly using long-
nosed pliers to adjust inlet direction.
AMP1200
The inlet opening louvres can be bent slightly using long-
nosed pliers to adjust inlet direction.
33
Summary of Contents for AML 100
Page 39: ...39 Notes ...
