6. Command Line Interface
89
AirLive AIRMAX5 User’s Manual
z_debug add ssid <ssid>
Purpose:
This command will replace the default ssid with the new one. It
will not add an additional SSID. We recommend to use the following
commands instead:
add ssid <ssidname> broadcast (enable/disable)
to add a new SSID
set ssid <ssidname>
to replace the current ssid name with a new one
Example:
Command> z_debug add ssid air1
z_debug reboot
Purpose:
reboot your AirMax5
Example:
Command> z_debug reboot
Rebooting...
z_debug set port radio1 11a <ssid> <channel>
Purpose:
Set SSID and Channel. We recommend using set commands
instead;
set ssid <ssid>
: to set the ssid name
set rate mode <mode value>
: set radio mode to
11a
|
supera_no_turbo
|
supera_static_turbo
.|
supera_dynamic_turbo
Example:
Command> z_debug set port radio1 11a air2 64
6.3 Show Commands
Show Commands are command that show the settings and status of AirMax5
show arp table
Purpose:
Show ARP Table
Example:
Command> show arp table
IP address Flags HWaddress Device
--------------------------------------------------------------------------------------------
192.168.1.100 C 00:1D:60:5E:AE:A0 lan