1. Introduction
AirLive AIRMAX5 User’s Manual
2
permitted, you should read through the entire chapter.
4.2 Operation Mode (wireless):
Operation mode is the page where all the
wireless settings and router mode settingsare. Therefore, it is advised that
you must read through the entire section.
z
4.2.3 Site Survey:
Site Survey is the connection wizard that will search
for available networks and let you connect with the select network by
simply clicking. It also includes RSSI signal survey for antenna
alignment.
z
4.2.8 Advance Settings:
This section is where you can find all the
advance RF adjustments including TX output power, Antenna Settings,
Country Code, Noise Immunity, 802.1d STP..etc.
z
4.2.13 Bandwith Management:
Be sure to read about AirMax5’s
powerful Bandwidth Control that allow you to limit up/downlink speed by
interface, IP, MAC address, or IP segment. This section provides
step-by-step examples also.
4.3 WDS Settings:
Here explans the WDS setting page. After reading this
section, please go to
Chapter 9: Bridge Network example
to see
step-by-step instructions on setting up a multi-point WDS Bridge network.
4.4 Router Modes:
This section includes WAN port, virtual server, remote
management, virtual servers and all router related settings.
Chapter 5: Web Management 2: Configurations and Status
This chapter explains all the non-wireless settings and status such as IP settings,
Ping Watchdog.
5.1.6 PING Watchdog:
PING watchdog is a crucial function to keep your
wireless connection alive. When AirMax5 can’t get a response from
remote devices, it will attempt to re-establish the connection. AirMax5’s
PING watchdog goes the extra step to allow 2 sets of IP to avoid false
alarm.
5.1.8 Configurartion Save and Restore:
You should always backup your
configurations so you can restore in the event of system crash.
Chapter 6: Command Line Interface
This chapter explains all the commands in the Telnet and SSH interface. Be sure to
“save config” after making all changes. In case you forget a command, just type
“help” to display all available commands and their usage.
Chapter 7: Antenna Alignment
This chapter provides detail information about AirMax5’s antenna. It also provides
step-by-step instructions on how to make antenna alignment using LED indicator or
Signal Survey function.
Chapter 8: Application Example: Infrastructure