Air Live AIRMAX5 User Manual Download Page 89

Page: 89 / 183

5. Web Management2: System Configuration and Status

AirLive AIRMAX5 User’s Manual

5.1.8 Configuration Save and Restore

System Configuration -> Configuration Save and Restore

You can save system configuration settings to a file, and later download it back to the
AIRMAX5 by following the steps.

Step 1

Select

Configuration Save and Restore

from the

System Configurations

menu.

Step 2

Enter the path of the configuration file to save-to/restore-from (or click the

Browse

button to locate the configuration file). Then click the

SAVE TO FILE

button to

save the current configuration into the specified file, or click the

RESTORE FROM

FILE

button to restore the system configuration from the specified file.

5.1.9 Factory Default

System Configuration -> Factory Default

You can reset the configuration of your AIRMAX5 to the factory default settings.

Step 1

Select

Factory Default

from the

System Configuration

menu.

Step 2

Click

YES

to go ahead and restore the configuration to the factory default.

Summary of Contents for AIRMAX5
























































































































































































Search results

Summary of Contents for AIRMAX5

Reviews:

Air Live AIRMAX5, User Manual, Page: 89 / 183

Search results

Summary of Contents for AIRMAX5

Reviews: