manualshive.com logo in svg

Air Live AIRMAX5, User Manual, Page: 55 / 183

Share
Download
Air Live AIRMAX5 User Manual Download Page 55

4. Web Management-Wireless and WAN Settings 

 

 

AirLive AIRMAX5 User’s Manual 

48

 

4.2.8 Advance Settings (Wireless) 

Operation Mode -> Setup -> Advance Settings

 

This page includes all the wireless settings that change the RF behaviors of AirMax5.    It is 
important to read through this section before attempting to make changes.   
 

 

 

„

 

Beacon Interval

: 

Beacon Interval: 

The device broadcasts beacon frames regularly to 

announce its existence. The beacon Interval specifies how often beacon frames are 
transmitted in time unit of milliseconds. The default value is 

100

, and a valid value 

should be between 1 and 65,535.   

 

„

 

RTS Threshold: 

RTS/CTS frames are used to gain control of the medium for 

transmission. Any unicast (data or control) frames larger than specified RTS threshold 
must be transmitted following the RTS/CTS handshake exchange mechanism. The 

Summary of Contents for AIRMAX5
























































































































































































Reviews:

No comments