manualshive.com logo in svg

Air Live AIRMAX5, User Manual, Page: 42 / 183

Share
Download
Air Live AIRMAX5 User Manual Download Page 42

3. Configuring the AirMax5 

 

 

 

35 

                       

AirLive AIRMAX5 User’s Manual

 

3.5.4 Set the Time and Date     

It is important that you set the date and time for your AirMax5 so that the system log will 
record the correct date and time information.  Please go to “

System Configuration” 

->Time Settings

.    We recommend you choose “Enable NTP” so the time will be keep 

even after reboot.    If your AirMax5 is not connected to Internet, please enter the time 
manually.    Please remember to select your local time zone and click “Apply” to finish. 

 

 

3.5.5 Change System Management   

It is recommended that you change the system management settings first.    Please go to 
“

System Configuration

”-> “

System Management

”.    The default web management time 

out is 10 minutes, you can set to longer period if needed.    For WISP administrators, you 
can consider turning off HTTP and Telnet for security purpose. 

 

5 

4

3

2 

1

6 

Summary of Contents for AIRMAX5
























































































































































































Reviews:

No comments