Air Live AIRMAX5 User Manual Download Page 33

Page: 33 / 183

3. Configuring the AirMax5

AirLive AIRMAX5 User’s Manual

When the “Wireless Router Manager Console” appears, please enter “airlive” for
password.

Now you are ready to enter commands

To get a list of available command and their usage, please type “help” on the
command prompt.

SNMP Management

: The AirMax5 support SNMPv1/v2 management. If you

have a SNMP management software, it can manage the AirMax5. The AirMax5’s
SNMP support is as followed:

SNMP v1/v2 support

SNMP Read/Write Community String

SNMP

Trap

support

MIB and MIB II Support

Ether-like

MIB

IEEE802dot11

MIB

Private

MIB

A copy of the AirMax5’s Private MIB can be found in the “Private MIB”

directory on the installation CD. Please also visit our website to
check if a new version is available.

For more information about Telnet and SSH configuration, please go to
Chapter 7 Command Line Interface

Summary of Contents for AIRMAX5
























































































































































































Search results

Summary of Contents for AIRMAX5

Reviews:

Air Live AIRMAX5, User Manual, Page: 33 / 183

Search results

Summary of Contents for AIRMAX5

Reviews: